Freescale MCF51AG128三相BLDC马达控制设计方案
2017-01-21 13:17:01 点击次数：
上一篇：应用于小封装充电器的低成本适配器解决方案 贴片电感
– IIC — Compatible with IIC bus standard and SMBus version 2 features; up to 100 kbps with maximum bus loading;multi-master operation; software programmable for one of 64 different serial clock frequencies; programmable slaveaddress and glitch input filter; interrupt driven byte-by-byte data transfer; arbitratihttp://www.ruishen.net.cn/电感器厂家on lost interrupt with automatic modeswitching from master to slave; calling address identification interrupt; bus busy detection; broadcast and 10-bit addressextension; address matching causes wake-up when MCU is in Stop3 mode; DMA support
– SCI — Two serial communications interface modules with optional 13-bit break; full-duplex, standard non-return-to-zero(NRZ) format; double-buffered transmitter and receiver with separate enables; 13-bit baud rate selection with /32fractional divide; interrupt-driven or polled operation; hardware parity generation and checking; programmable 8-bit or9-bit character length; receiver wakeup by idle-line or address-mark; address match feature in receiver to reduceaddress-mark wakeup ISR overhead; 1/16 bit-time noise detection; DMA transmission for both transmit and receive
– SPI — Two serial peripheral interfaces with full-duplex or single-wire bidirectional option; double-buffered transmitterand receiver; master or slave mode operation; selectable MSB-first or LSB-first shifting; 8-bit or 16-bit data modes;programmable transmit bit rate; receive data buffer hardware match feature; DMA transmission for transmit and 大电流电感器receive
• Input/Output
– Up to 69 GPIOs and one Input-only pin
– Interrupt or DMA request with selectable polarity on all input pins
– Programmable glitch filter, hysteresis and configurable pull up/down device on all input pins
– Configurable slew rate and drive strength on all output pins
– Independent pin value register to read logic level on digital pin大电流电感详解六种逆变电源的控制算法 FB脚的电压随输出功率的增加而增加的原因 多种增值功能的手持POS机设计方案 五大要素助你选择快速连接器 “一点接地”布局实现PSR电源设计之EMC设计技巧 龙门吊大车电机过载原因分析及解决方案 废水资源化处理过程在线监测方法 怎样选择最优的 Buck 转换器拓扑？ 工业通信中的检错码技术 [DCDC]电机电路总是电流过大，烧保险丝，请各位帮忙
– IIC — Compatible with IIC bus standard and SMBus version 2 features; up to 100 kbps with maximum bus loading;multi-master operation; software programmable for one of 64 different serial clock frequencies; programmable slaveaddress and glitch input filter; interrupt driven byte-by-byte data transfer; arbitratihttp://www.ruishen.net.cn/电感器厂家on lost interrupt with automatic modeswitching from master to slave; calling address identification interrupt; bus busy detection; broadcast and 10-bit addressextension; address matching causes wake-up when MCU is in Stop3 mode; DMA support
– SCI — Two serial communications interface modules with optional 13-bit break; full-duplex, standard non-return-to-zero(NRZ) format; double-buffered transmitter and receiver with separate enables; 13-bit baud rate selection with /32fractional divide; interrupt-driven or polled operation; hardware parity generation and checking; programmable 8-bit or9-bit character length; receiver wakeup by idle-line or address-mark; address match feature in receiver to reduceaddress-mark wakeup ISR overhead; 1/16 bit-time noise detection; DMA transmission for both transmit and receive
– SPI — Two serial peripheral interfaces with full-duplex or single-wire bidirectional option; double-buffered transmitterand receiver; master or slave mode operation; selectable MSB-first or LSB-first shifting; 8-bit or 16-bit data modes;programmable transmit bit rate; receive data buffer hardware match feature; DMA transmission for transmit and 大电流电感器receive
• Input/Output
– Up to 69 GPIOs and one Input-only pin
– Interrupt or DMA request with selectable polarity on all input pins
– Programmable glitch filter, hysteresis and configurable pull up/down device on all input pins
– Configurable slew rate and drive strength on all output pins
– Independent pin value register to read logic level on digital pin大电流电感
如何利用软件作为激励来加速SoC系统级验证？ 4月08日 第三届·无线通信技术研讨会 立即报名 12月04日 2015•第二届中国IoT大会 精彩回顾 10月30日ETF•智能硬件开发技术培训会 精彩回顾 10月23日ETF•第三届 消费
RFID无线识别电子标签基础介绍：无线射频识别技术（Radio Frequency Idenfication，RFID）是一种非接触的自动识别技术，其基本原理是利用射频信号和空间耦合（电感或电磁耦合）或雷达反射的传输特性，实现对被识别物体的
凌力尔特推出同步降压-升压型转换器 LTC3111 加利福尼亚州米尔皮塔斯 (MILPITAS, CA) – 2014 年 1 月 22 日 – 凌力尔特公司 (Linear Technology Corporation) 推出同步降压-升压型转换器 LTC3111，该器件可在很宽的
在线客服1